Single Enthalpy And Dual Enthalpy High Limit Curves; Single Enthalpy Curve And Boundaries - York Predator XP Series Installation Manual

998659-YIM-C-0614
• Press the  button to increase (change) the displayed
1
parameter value.
• Press the  button to decrease (change) the displayed
parameter value.
• Press the  button to accept the displayed value and
store it in non-volatile RAM.
• CHANGE STORED displays.
• Press the  button (MenuUp/Exit) to return to the
previous menu.
Menu Structure
The Menus in display order are:
• STATUS
• SETPOINTS
• SYSTEM SETUP
• ADVANCED SETUP
• CHECKOUT
• ALARMS
1. When values are displayed, pressing and holding the  and
button causes the display to automatically increment.
ECONOMIZING
AVAILABLE
NOT AVAILABLE
TEMPERATURE
Figure 26: Single Enthalpy Curve And Boundaries
Table 11: Single Enthalpy and Dual Enthalpy High Limit Curves.
Enthalpy Temp.
Curve Dry-Bulb (°F)
ES1 80.0
ES2 75.0
ES3 70.0
ES4 65.0
ES5 60.0
HL 86.0
30
Temp. Enthalpy
Dewpoint (°F) (btu/lb/da)
60.0 28.0
57.0 26.0
54.0 24.0
51.0 22.0
48.0 20.0
66.0 32.4
NOTE: Your menu parameters will be different depending on
your configuration. See the JADE™ Economizer
Module accessory instruction P/N 1150208-UAI-A-0514
included in this instruction packet for additional menu
information.
Economizer Setup And Configuration
Before being placed into service, the JADE™ Economizer
module must be setup and configured for the installed system.
NOTE: During setup, the Economizer module is live at all
times.
The setup process uses a hierarchical menu structure that is
easy to use. You press the  and  arrow buttons to move
forward and backward through the menus and press the 
button to select and confirm setup item changes.
Time-out and Screensaver
When no buttons have been pressed for 10 minutes, the LCD
displays a screen saver, which cycles through the Status items.
Each Status items displays in turn and cycles to the next item
after 5 seconds.
P2 (T,RH)
ES5
Point P1
Temp. °F Humidity %RH
80.0 36.8
75.0 39.6
70.0 42.3
65.0 44.8
60.0 46.9
86.0 38.9
DUAL ENTHALPY
HIGH LIMIT
SINGLE ENTHALPY
P1 (T,RH)
ES4 ES3 ES2 ES1
Point P2
Temp. °F Humidity %RH
66.3 80.1
63.3 80.0
59.7 81.4
55.7 84.2
51.3 88.5
72.4 80.3
Johnson Controls Unitary Products
HL