Table of Contents
Advertisement
2.3 Adjusting One-piece Footplate (Angle & Depth)
NOTE: For this procedure, refer to FIGURE 2.3.
1.
Remove the two locking screws (A & B) sideways with Allen key 4 mm.
2.
Position the one-piece footplate assembly to the desired angle.
3.
Position the one-piece footplate assembly forwards or backwards to the desired depth.
4.
Insert the locking screw (B) in one of the three threaded holes.
5.
Securely tighten with Allen key 4 mm.
1603966-B
FIGURE 2.3
9
Advertisement
Table of Contents
