®
Invacare
Action Vertic
7.
Periodically check handrims to ensure they are secured to the rear wheels. Refer to
section 5.3
8.
Periodically check caster wheel bearings to make sure they are clean and free from
moisture. Use a Teflon
9.
Check upholstery for sagging, rips or tears.
10.
Clean upholstery with mild soap and water.
1.4 Stability Warning
The seat height, seat depth, back angle, seating system/upholstery, size/position of the rear
wheels, size/position of the front casters, seating options (e.g., back bag, ...) as well as the user
condition directly relate to the stability of the wheelchair.
Any change to one or any combination of these factors changes the center of gravity and may
cause the wheelchair to increase/decrease in stability.
Seat-to-floor heights have specific positions depending on rear wheel size, rear wheel position,
front caster size/position and seat-to-floor angle.
6
Replacing Handrims.
®
lubricant if necessary.