Quick Installation
Connect either VGA or HDMI Video Source from the monitor to the computer. Make sure
1.
both monitor and computer are powered OFF. Please note. The monitor ships with HDMI
cables only. VGA cable may be sourced separately from a cable supplier.
2.
Connect the earphone to the earphone output terminal of the monitor (Earphone not
supplied).
3.
Connect power cord to a properly grounded AC outlet, and then to the monitor.
4.
Power-ON computer and then POWER-ON the monitor.
5.
Set the timing mode on your computer. Recommended resolution and refresh rate is
1920 x 1080 @ 60Hz.
Figure 1:
Earphone
(not supplied)
Power cable
VGA cable (not supplied)
9
Audio cable
(not supplied)
HDMI cable
PC