Testing The Installation In Windows Me - Creative Modem BLASTER USB DE5771 Getting Started

Testing the
Installation in
Windows Me
1. Click Start -> Settings -> Control Panel.
2. Double-click the Modems icon. The Modems
Properties dialog box in Figure 3-23 appears.
3. Click the Diagnostics tab, then click the COM port that
has been assigned to your modem.
4. Click the More Info button to display the response
status of your modem (Figure 3-24).
If your modem is not responding, it may be due to a conflict
between the modem and another peripheral device. To
resolve the conflict, you must change the settings on your
modem (see "Resolving Hardware Conflicts" on page B-
2).
Figure 3-23 : Modem Properties
dialog box.
Figure 3-24 : Response status of
your modem.
Installing and Testing Modem Drivers 3-14