Testing The Installation In Windows 98/98Se - Creative Modem BLASTER USB DE5771 Getting Started

Testing the
Installation in
Windows 98/
98SE
1. Click Start -> Settings -> Control Panel.
2. Double-click the Modems icon. The Modems Properties
dialog box in Figure 3-7 appears.
3. Click the Diagnostics tab, then click the COM port that
has been assigned to your modem.
4. Click the More Info button to display the response status
of your modem (Figure 3-8).
If your modem is not responding, it may be due to a
conflict between the modem and another peripheral
device. To resolve the conflict, you must change the
settings on your modem (see "Resolving Hardware
Conflicts" on page B-2).
Figure 3-7 : Modem Properties
dialog box.
Figure 3-8 : Response status of your
modem.
Installing and Testing Modem Drivers 3-5