Installing The Guard - Toro 03614 Installation Instructions Manual

Installing the Guard

Installing the Guard on a
Reelmaster 3100/3500 Series
or Groundsmaster 3500 Series
Traction Unit
1. Loosely mount the brackets to the roll bar as
shown in Figure
1. Right mounting bracket
2. Left mounting bracket
3. Flange nut (4)
2. Swing the guard wings forward as shown in
Figure 3.
2.
Figure 2
4. Mount strap (4)
5. Carriage bolt—3/8 x 3-1/2
inch (4)
6. Front of the machine
1. Guard wing—initial
position
3. Use the 2 shoulder bolts, 2 spacers, and 2
flange nuts to attach each latch-arm link to each
guard wing
1. Shoulder bolt
g198449
2. Latch-arm link
4. Install the guard assembly to the brackets as
shown in
Note:
Ensure that the guard is centered. Use
the holes in the guard frame that align with holes
in the brackets.
2
Figure 3
2. Guard wing—final position
(Figure 4).
Figure 4
3. Spacer
4. Flange nut
Figure 5.
g198197
g198332