Toshiba Strata DK280 User Manual page 32

To Record a Message:
1. Press the # button to
access alpha
characters. Refer to
Figure 4-l for an
explanation of the
1
2. Press * or to move
the cursor (-) to the
desired position (the
left edge of the display
for a new message, or
two spaces to the right
of the preprogrammed
message to add
information).
3. Press the button that
has the letter you want
to enter. Use the 0
button to shift from
letter to letter on the
button.
4. If you want to enter a
number, press the #
button to change to
numeric characters.
Press the # button
again to return to alpha
characters.
5. The following special
characters are set by
pressing 1 and then
pressing 0 to step
through the available
characters: Q, Z, :, -, +, /.
4-2
1
button moves
cursor to the right
(also used to access
special characters
and to enter "blanks"
in the alpha mode)
cursor to the left
0 button is used to shift between the three letters on each
alpha button (also used to access special characters)
Figure 4-l
For example: If you press 3, a "D" will be displayed. By pressing 0, the "D" is
changed to "E". By pressing 0 again, the "E" is changed to "F". Press 0 again
and the "F" changes to "D". To enter a space, press 1.
Numbers are also entered on the dialpad.
Each button has three
letters that are used in