Busy Field Display; Mode Exit; Disa Security Code: Add/Delete/Change - Toshiba Strata DK280 User Manual

1. Press the Mode
button.
MODE NO.?
2. Dial 1.
3. Press the Page
button to rotate Busy
Field groups.
To Exit Any Mode:
1. Press the Mode
button.
2. Dial 0.
To Store New DISA
Security Code:
I. Press the Intercom
button and dial the 3-
digit access code.
2. Dial the new DISA
security code.
NO. NNN
3. Press the Redial
button.
NO. NNN
DATA PROGRAMMED I

BUSY FIELD DISPLAY

Your telephone must be idle to use the &lode button when Soft Keys are turned
ON.
NOTE:
The Busy Lamp Field (BLF) mode will stop all other displays from appearing on
your telephone LCD.
Refer to the figure in Chapter 1 Summary of LCD Functions.

MODE EXIT

The LCD displays "MODE NO.?" Your telephone must be idle to use the Mode
button when Soft are turned ON.
Keys
The LCD displays date/day/time.
Direct Inward System Access (DISA) security codes can be added, deleted, and
changed from designated station(s) only. For security purposes, the 3-digit
access code is not given in this guide. It is available from your telephone system
administrator.
To change or delete the DISA security code, these steps must be performed
from a station that was selected in system programming.
You will hear a confirmation tone.
The DISA security code can be 1 m 15 digits.
You will hear a confirmation tone.
2 - 5