Soft Key Prompt Definitions - Toshiba Strata DK280 User Manual

3-4
Station 203.
n
You can exit the Conference and the other parties will remain connected
if you press the EXIT Soft Key.
You can add another stationor CO line by pressing the CONF Soft Key.
NOTE:
If the Soft Key feature is activated at your station, incoming call information will
not display on your LCD while your station is busy To display this information,
you must either disconnect the existing call or place

SOFT KEY PROMPT DEFINITIONS

The following list provides definitions of all of the Soft Key prompts that could
appear on your LCD.
call. TRNS can cause an immediate or announced transfer, depending on how
the feature is set in system programming.
CONF-Press this Soft Key to initiate or complete a Conference.
PGE-Press this Soft Key to park an outside call and to gain access to a menu
of Page options.
RING-Press this Soft Key to make a called station ring when making a voice
announce call to the station.
TALK-Press this Soft Key to make a voice announcement to a called station
that is ringing.
MESG-Press this Soft Key to set a message waiting indication at a busy or
unanswered station.
OVRD-Press this.Soft Key to gain access to override options or to override a
station that is busy or in the Do Not Disturb mode.
station.
EXEC-(Executive Override) Press this Soft Key to break into the conversation
of a busy called station.
ACB-Press this Soft Key to activate Automatic Callback after reaching a busy
station, CO line, or CO Line group.
ABR-Press this Soft Key to activate Automatic Busy Redial after dialing a busy
outside telephone number.
dn hold.