Toshiba Strata DK280 User Manual page 15

2. When Call Is
Answered
3.
Hold
H O L D L I N E 10
J A N 01 S U N 12:1!I
4.
Hold Recall
5. Outgoing
N O . N N N
U S I N G L I N E 6
6. CO Line Queuing
(Callback)
L I N E 3 A C E
Date/Time:
N O . N N N
M A Y 2 4 M O N 12:05 I
Dialed Number:
N O . N N N
5 5 5 1 3 7 4
2. intercom
2 0 1 I
Transferred CO call---CO line is transferred to your station in the ringing state b!
another station.
Camped-on CO call-CO line was camped-on to your busy station and rings
your station when you hang up.
The display changes to indicate calling status.
You have put a CO line call on hold at your station.
Held call automatically recalls your station after a programmed period of time.
When you manually select a CO line, it is displayed. This display is replaced by
the dialed number as you dial.
When the CO line queuing feature rings back to your station.with an available :- 7
CO line, that line number will be displayed.
Page
1. Press the button to display date/time when talking on a Central Office
(CO) line (Soft Keys must be off before the call is started).
2. The date/time is adjusted on a system-wide basis by the station located in
port 00 (usually station 200).
The digits are displayed as you dial over either a Central Office (CO) line or the
intercom using:
n
Manual dialing
n
Automatic dialing
Repeat last number dialed
n
Saved number redial
NOTE:
If you are calling on a CO line, the display will automatically change from dialed
number to elapsed time after a programmed period of time.