Automatic Busy Redial - Toshiba Strata DKT3010F-S User Manual

Advanced Operation

Automatic Busy Redial

After reaching a busy outside number, you can activate Automatic Busy Redial so that the system
automatically redials the number at regular intervals. The system repeats the redial until the
destination is no longer busy. This feature may not be on some telephones on your system.
Automatic Busy Redial is not attempted while your station is busy, but continues to time-out. The
system inserts a pause (P) on your LCD before redialling the number.
To activate Automatic Busy Redial
1. When you reach a busy number, press
red. You hear confirmation tone.
2. Hang up or press
(depending on system programming). Your telephone receives ring tone when Automatic Busy Redial
dials the number and it is available. The extension and Spkr LEDs flash green.
3. Lift the handset or press
Spkr
press within recall timeout (five to 60 seconds) after a connection is made, you hear a muted
ring for another 30 seconds, then the call disconnects.
To cancel Automatic Busy Redial
Auto Busy Redial
Press
Strata CTX DKT3000/2000-Series Digital Telephone October 2002
Auto Busy Redial
Spkr
. The system redials, up to five to 20 times, every 30 to 180 seconds
Spkr
and wait for the party to answer. If you do not pick up the handset or
or extension +
Cnf/Trn
or
#442
.
Automatic Busy Redial
#441
+ . The LED flashes
27