ATM Interface Cables
•
Figure 15
Figure 16
•
Figure 17
26 Asynchronous Transfer Mode Interface Processor (AIP) Installation and Configuration
For multimode SONET connections, connect the multimode cable to the SC connector on the
PLIM. (See Figure 15.)
SONET Multimode SC Duplex PLIM
The SONET multimode SC-duplex connector is shipped with a dust plug. (See Figure 16.)
Remove it by pulling on the plug as you squeeze its sides.
SONET ATM Multimode Fiber-Optic Transceiver and Dust Plug
For single-mode SONET connections, connect the single-mode cable to the ST connector on the
SONET PLIM. (See Figure 17.)
SONET Single-Mode PLIM