Floating Vendor - TEC EM1-31064 Owner's Manual

14. OPERATING PROCEDURES

14.13 FLOATING VENDOR

Menu: REG
Mode: WEIGH, FIX, or BY COUNT
Floating vendor function allows you to register different commodities sales together. This function is
available when the Initial Setting #11-1 is set to 1 and using a receipt.
Be sure to select IN-LINE in Section 11.15 LON SYSTEM even if no scale is connected, then enter
the ID# 1, turn the power off and then on.
Maximum number of registerable commodities
One scale:
One vendor:
Enter the PLU#
Press:
Place a commodity on
the platter.
Group Vender
Press the speed key to which
the group vendor # is assigned.
Enter the last digit
of the number.
NOTES: 1. Print format varies depending on the settings of the
Initial Setting #11-1, 11-2, 11-3, 11-4 and 11-7.
2. Care must be taken for the following when a clerk
label is printed.
(1) Cleark labels can not be used with Floating
Clerk (receipt) in a system.
1) The clerk accumulation memory is used for
200 commodities
99 commodities
2 0
PLU
<REG.>
APPLE
1.000
the Floating Clerk's.
If the Clerk labels and Floating Clerk are
used in the same system, the registered
data by Floating Clerk (receipt use) and
Clerk labels will be stored into the same
memory.
Press the speed key the
vendor # is assigned to.
10
lb UNIT/$
TOTAL $
1.00
1.00
14-20
14.13 FLOATING VENDOR
Direct Vendor
1
Vendor #
Item Count
(Sample label)
EM1-31064
Clerk name