TEC EM1-31064 Owner's Manual page 83

14. OPERATING PROCEDURES
Stopping or Canceling Label Issue
Clear an error or stop
issuing a label.
Cancel an output
Press:
Stop issuing the labels and
cancel PLUs which have
not been output.
NOTES: 1. When the label for NET. WT statement is not selected, pressing the PRESET COUNT
key in FIX mode results in an error.
2. Programmed items are reset when:
1 the power is off.
2 changing the menu. (PROG./REG)
3 changing the mode. (weigh/by count/fix)
4 batch printing has been finished.
3. Pressing the PRESET COUNT key to preset the 31st item results in an error.
4. The LOGO and Grade Line called per PLU cannot be changed.
5. The label issued in Batch Print Mode cannot be corrected using the VOID key.
6. "TOTALS OVERFLOW" error occurs when the PRINT key is pressed to issue each
PLU label.
14.11 BATCH PRINT MODE (with 30 Items Run Assignment)
z
C
VOID
PRT
*
C
A
Completed
14-18
EM1-31064