Toshiba TLP680U Owner's Manual page 23

Operations
(Continued)
AUTO SET ON/STANDBY
AUTO SET
KEYSTONE
MARKER LASER
POINTER
PJ
L-CLICK R-CLICK
MENU ENTER
RGB VIDEO CAMERA
RESIZE RESET FREEZE
MUTE CALL
Adjusting the image automatically
An image which is flickering, blurred or is not
centered, can be adjusted automatically.
Press AUTO SET.
The image is adjusted automatically.
To adjust further, make the "Image" adjustment
31
on the menu.
Cutting off the picture and sound
temporarily
1) Press MUTE.
The sound is cut off temporarily.
" " appears.
2) Press MUTE again.
The picture is also cut off temporarily.
" " appears.
To restore, press MUTE again.
Note
If you press MUTE while the menu is displayed,
the menu disappears.
Freezing the picture
Press FREEZE.
FREEZE The picture freezes.
" " mark appears on the screen.
CALL
MUTE To release the picture, press FREEZE again.
Any other operations can also release the
picture.
Note
This function is convenient for the case where
you are using the document imaging camera
model and change documents to project
through the camera.
Displaying the input source
information
Press CALL.
The current input source and the signal status
information is displayed.
To close the display, press CALL again.
CONTENTS
Contents of displayed items
[ S t a t u s ]
I n p u t
S i g n a l
S c r e e n
S y n h r
Ve r / r e v
Current input source
Signal system of the input source
Signal system automatically detected
by the projector
45
(Mode determination )
Synchronizing polarity of input signal
P=Positive N=Negative
Version number of software
Note
If you press CALL while the menu is displayed,
the menu disappears.
23
: RGB
: XGA6 0
: XGA6 0
c o . : N / N
. . : V0 1 / R0 1
(Continued)