• Using the Printer function.
page 129 "Basic Procedure for Printing Documents"
*4 When loading OHP transparencies in the bypass tray, do not stack paper over the limit mark.
*5 Load envelopes so that the height of the stack of envelopes does not exceed the limit mark of the bypass tray
without pressing on the stack of envelopes.
Notes on Special Paper
Paper Type
Setting thick paper
Setting envelopes
Setting letterhead paper
Setting label paper (adhesive labels)
Setting transparencies
Paper Thickness for Each Paper Weight
Paper Thickness
Thin Paper
Plain Paper 1
page 197 "Thick Paper Orientation and Recommended
Status"
page 198 "Envelope Orientation and Recommended
Status"
page 200 "Loading Orientation-fixed Paper or Two-sided
Paper"
We recommend that you use specified label paper. If
paper other than the specified one is used, normal
operation and quality cannot be guaranteed.
1
• Use A4 or 8
/
× 11 size OHP transparencies,
2
and specify their size.
• Usually only one side of OHP transparencies can be
used for printing. Be sure to load them with the print
side down.
When using transparencies, check their print sides
carefully. Erroneous loading may cause problems. Remove
copied or printed sheets one by one.
Paper weight
2
60–63 g/m
(16 lb. Bond)
2
64–74 g/m
(17–20 lb. Bond)
Recommended Paper Sizes and Types
Note
193