Power-On Self Tests - Ricoh M047 Series Training

! Controller tests following devices at power-on. If error
is detected, error code is stored in controller board.
" CPU, ASIC and clock
" Flash ROM
" Resident and optional SDRAM
" NIB
" IEEE 802.11a/g, Gigabit Ethernet or IEEE1284
" NVRAM
" Optional HDD
! To check error codes, use engine SP 7832.
! Refer to "Controller Error" for details about error
codes.
Slide 126
.

Power-On Self Tests

» (if installed)
» (if installed)
M047 Series Training - Kriss-P2 /Model Kr-P2
126