Table of Contents
Advertisement
Display
Selecting a display illumination during a
colour scan
u
Press the MENU button ;.
u
Press the
or
edly until "COL SCAN" appears on the
display.
u
or button 8 to start the
Press the
colour seek.
The device starts changing the display illu-
mination colour.
To select the currently set colour,
press the MENU button ;.
u
To start the seek tuning again,
u
or button 8.
press the
If you found the desired colour,
u
press the MENU button twice ;.
button : repeat-
External audio sources
External audio sources, such as portable
CD players, MiniDisc players or MP3 play-
ers, can be connected to the device in two
ways:
1.
Via the rear AUX input (if no CD changer
is connected to the device).
Notes:
•
An adapter cable is needed to con-
nect an external audio source via the
rear AUX input. You can obtain this ca-
ble (Blaupunkt no.: 7 607 897 093)
from your Blaupunkt dealer.
•
The rear AUX input must be activated
in the menu.
•
The rear AUX input can be selected
with the SOURCE
"AUX INPUT" then appears on the dis-
play.
2. Via the front AUX-IN socket.
Note:
As soon as an audio source is con-
nected to the front AUX-IN socket,
it can be selected with the SOURCE
button 3. "FRONT AUX" then ap-
pears on the display.
External audio sources
button 3.
69
Advertisement
Table of Contents
