Switching To Radio Mode; Convenient Rds Functions (Af, Reg); Selecting The Waveband/ Memory Bank - Blaupunkt LONDON MP37 7 647 553 310 Operating Instructions Manual

Radio mode

Switching to radio mode

If you are in CD, CD changer or AUX mode,
u press the BAND•TS button =
or
u press the SOURCE button 3 repeat-
edly until the memory bank, e.g. "FM1",
appears on the display.
Convenient RDS functions
(AF, REG)
The convenient
(Alternative Frequency) and REGIONAL ex-
tend your radio's range of functions.
• AF: If the RDS function is activated, the
radio automatically tunes into the best
receivable frequency for the station
that is currently set.
• REGIONAL: At certain times, some ra-
dio stations divide their programme
into regional programmes providing
different content. You can use the REG
function to prevent the car radio from
switching to alternative frequencies
that are transmitting different pro-
gramme content.
Note:
REGIONAL must be activated/deacti-
vated separately in the menu.
Switching REGIONAL on/off
u Press the MENU button ;.
u
Press the or
until "REG" appears on the display.
48
RDS functions
button : repeatedly
"OFF" or "ON" is displayed alongside "REG".
To switch REGIONAL on/off,
u
press the
When you have fi nished making your
changes,
u press the MENU button ;.
Switching the RDS function on/off
To switch the RDS functions AF and
REGIONAL on or off,
u
press and hold down the TRAF•RDS
AF
button 7 for longer than two sec-
onds.
If the RDS comfort function is active, RDS
appears on the display.
Selecting the waveband/
memory bank
This device can receive programmes broad-
cast over the FM frequency range as well as
the MW and LW (AM) wavebands. There are
three memory banks available for the FM
waveband (FM1, FM2 and FMT) and one
for each of the MW and LW wavebands.
Five stations can be stored in each memory
bank.
To switch between the FM memory banks
(FM1, FM2 and FMT) and the MW and LW
wavebands,
u briefl y press the BAND•TS button =.
or button 8.