Switching Regional On/Off; Tuning Into Stations Manually; Tuning Into A Station; Automatic Station Seek Tuning - Blaupunkt KIEL CD36 Operating Instructions Manual

➮
Press the MENU button 8.
➮
Press the or
peatedly until "REG" appears in
the display. "OFF" or "ON" is dis-
played alongside "REG".
➮
To switch REGIONAL on/off, press
button 7.
the or
➮
Press the MENU button 8.
This device can receive programmes
broadcast over the FM frequency
range as well as the MW and LW (AM)
wavebands (MW and LW only on the
Malaga CD36). There are three mem-
ory banks available for the FM wave-
band (FM1, FM2 and FMT) and one
for each of the MW and LW wave-
bands. Six stations can be stored in
each memory bank.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮
briefly press the BND•TS button
;.
There are various ways of tuning into
a station.
➮
Press the or
The radio tunes into the next receiva-
ble station.
32
button 7 re-
button 7.
You can also tune into stations manu-
ally.
Note:
You can only tune into stations
G
manually if the RDS function is
deactivated.
➮
Press the or
If radio stations provide several pro-
grammes, you have the option of
browsing through their "broadcasting
networks".
Note:
The RDS function must be activat-
G
ed before you can use this fea-
ture.
➮
Press the or
switch to the next station on the
broadcasting network.
Note:
When using this feature, you will
G
only be able to switch to stations
that you have received once be-
fore already. To receive the sta-
tions, use the scan function or the
Travelstore function.
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.
➮
Press the MENU button 8.
button 7.
button 7 to