Advertisement
Cobra Electronics
UI/Functional Specification
Model: MR HH150 USA and EU
WX SETUP MODE – Continue
WX setup mode notes:
While in setup mode, if no action from user for 15 seconds then SAVE and EXIT to standby.
When entering setup mode, the last saved value should be displayed.
Default settings are restored and displayed after a factory reset.
No signal reception in setup mode.
Other key definitions during Marine setup mode:
1) PTT - save settings and exit to WX standby mode
2) DW- save settings, exit to WX standby mode.
3) MEM / ESC - save settings, backup one level at time ultimately ending in WX standby.
4) WX / HI / LO - save settings, exit to WX standby mode.
5) SCAN - save settings, exit to WX standby mode.
6) 16 - save settings, exit to channel 16.
7) LIGHT / LOCK - turn ON / OFF back light - 10 seconds ON time.
ATIS (EU model only)
ATIS is entered and reset through the PC programming software utility for use by dealerships only.
15
Issue: Preliminary R2
Advertisement
