Advertisement
Cobra Electronics
UI/Functional Specification
Model: MR HH150 USA and EU
WX SETUP MODE
From WX Standby:
WX STANDBY
WX AUTO SCAN ON / OFF
WX Icon is flashing. "SCAN" and "ON" or "OFF" are flashing alternately.
("OFF" is the default setting).
When WX auto search is set to "ON", Scanning starts under the following
conditions:
1) Unit is in Marine Standby mode.
2) Unit is in Power Saver mode.
3) Once every 5 seconds the unit will wake up and check all 10 weather
channels for the 1050Hz WX Alert tone. (The WX Alert tone is sent for
8 seconds.)
4) If the WX Alert tone is detected, the unit will switch to the WX mode
on the WX Alert channel, sound a 1050 Hz tone, and flash the WX
Alert Icon..
5) The unit will remain on that WX channel until the user switches back to
the Marine Standby mode.
Use channel UP or DOWN to change setting.
Push Setup Key to save setting and move to the next setup item.
Default OFF -
alternate SCAN
and OFF in LCD
14
Issue: Preliminary R2
Advertisement
