Starting The Computer By Password - Toshiba 6100 User Manual

2. Insert the battery pack.
3. Secure the battery pack lock.

Starting the computer by password

If you registered a user password, you must enter it to start the computer. For more
information about how to set a password, refer to Chapter 7,
Passwords.
To start up the computer with the password, follow these steps:
1. Turn on the power as described in Chapter 3,
following message appears:
Password =
2. Enter the password.
3. Press Enter. The computer displays the message below while it starts up.
Valid password entered, system is now starting up.
If you enter the password incorrectly, a buzzer sounds.
NOTE: If you enter the password incorrectly three times in a row, the
computer shuts off. In this case, you must turn the computer back on to
retry password entry.
Starting the computer by password
Figure 6-2 Installing the battery pack
B
ATTERY PACK
HW Setup and
Getting Started and the
6-13