Scanning All Receivable Stations (Scan); Receiving Traffi C Announcements; Switching The Priority Of Traffi C Reports On/Off - Blaupunkt HAMBURG MP57 Operating Instructions Manual

Car radio cd mp3
Table of Contents

Advertisement

LO1" means it is set to the lowest sensitivi-
ty setting.
u
Set the desired sensitivity with the rock-
er switch
or
Scanning all receivable stations
(SCAN )
You can scan all receivable stations of a
waveband. The scan time can be set as
described in the chapter "User settings".
u
Select the waveband (FM, MW, LW)
whose receivable stations you want to
scan.
u
Press and hold the MENU/OK button
<
for approx. two seconds.
The display shows "SCAN". The tuner is
searching for stations.
As soon as the tuner has located a sta-
tion, it is played.
After a complete search of the frequency
band, scanning stops. The previously set
station is played.
You can do the following at any
time:
Store the currently scanned station
(press any station button
two seconds)
Cancel the scan (briefl y pressing the
MENU/OK button
=
.
9
for approx.
<
)
Receiving traffi c announcements
If you switch on the priority for traffi c an-
nouncements, the device uses the RDS serv-
ices TA (Traffi c Announcement) and EON
(Enhanced Other Networks). TA switches
traffi c reports even if you are currently lis-
tening to a different audio source. The vol-
ume for the traffi c announcement can be
adjusted (see the chapter "User settings",
section "Changing volume presettings").
If no traffi c information station is currently
defi ned, the RDS service EON ensures that
the device automatically changes to a traffi c
information station of the same broadcast-
ing network for the duration of a traffi c an-
nouncement.
Switching the priority of traffi c reports
on/off
The priority of traffi c reports is switched on
if the displays shows the
setting limits the station search and scan-
ning (SCAN) for traffi c information stations.
To switch the traffi c report priority on/off:
u
Press the TRAF button
u
To search for traffi c information sta-
tions, start the station seek tuning.
Note:
For the device to switch through traffic
reports, a station must be defined that
supports TA or belongs to a broadcast-
ing network with traffi c information sta-
tions.
Tuner mode
symbol. This
;
.
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save Article as PDF