Startup
u
Close the control panel.
The display briefl y shows "READING DISC".
Next, the following appears:
•
The audio CD display if an audio CD is
inserted.
•
The MP3 display if an MP3 or WMA CD
is inserted.
The CD starts playing.
Selecting the CD as audio source
You can select an inserted CD as audio
source:
u
Press the SOURCE button
ly until the desired display appears.
Note:
The CD mode can be selected only if a
readable CD is inserted.
To operate the audio CD display, please read
the chapter "CD mode (audio)".
To operate the MP3 display, please read the
chapter "CD/USB mode (MP3/WMA)".
Switching the device on/off
The device is switched on or off with the igni-
tion. The introductory animation starts and
can be cancelled with the MENU/OK button
<
. The device plays the audio source you
previously listened to.
To manually switch on the device:
u
Press the On/Off button
76
To switch off the device:
u
Adjusting the volume
>
repeated-
Excessive volume can damage your hear-
ing and you may fail to hear acoustic warn-
ing signals!
ü
ü
u
3
.
Press and hold the On/Off button
approx. two seconds.
Note:
To protect the vehicle battery if the igni-
tion is switched off, the device automati-
cally switches off after one hour.
DANGER!
High volume
The devices mutes itself while it chang-
es the CD in the CD changer or the au-
dio source. During this mute phase, the
volume may be changed, but it is not
audible. Do not increase the volume
during a mute phase.
Always set the device to a moderate
volume.
Turn the volume control
The current volume is shown on the dis-
play and used for all audio sources.
Notes:
•
The volume can also be changed
during a phone call/navigation an-
nouncement using the volume control
3
for
4
.