Removing A Memory Module - Toshiba Satellite P750 Series User Manual

8. Seat the memory module cover in place and secure it with one screw.
Take care to ensure that the memory module cover is firmly closed.
1. Memory module cover
9. Install the battery pack - refer to
Chapter 6,
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start -> Control Panel -> System and Security ->
System icon.

Removing a memory module

To remove the memory module, follow the steps as detailed below:
1. Shut down the computer - make sure the Power indicator is off (refer to
the
required).
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
Modes, if required).
5. Loosen the screw securing the memory module cover in place - please
note that this screw is attached to the cover in order to prevent it from
being lost.
User's Manual
Figure 3-5 Seating the memory module cover
Power and Power-Up
Turning off the power
2. Screw
Replacing the battery pack
Modes, if required.
section in Chapter 1,
section in Chapter 6,
Satellite P750/P755 Series
2
1
section in
Getting Started, if
Power and Power-Up
3-24