Operator Control Elements And Door-Mounted Instruments - Siemens SIMOVERT MV Series Commissioning Instructions

5 Operation
The cabinet doors must always be closed when the drive converter is operational!
The doors have limit switches, which immediately shutdown the drive converter
(safety shutdown) if the doors are opened.
It is not permissible to
Further, it is not permissible that objects are placed on the top roof assembly of the
drive converter, as these could obstruct the pressure equalization flaps.
5.1 Operator control elements and door-mounted
instruments
The operator control elements and door-mounted instruments are located in the
door of the control cabinet.
H1 H2 H3 H4
P1 P2
A10
S11 S12 S13
S10
88
♦
H1 Drive converter OFF
H2 Drive converter ON
H3 Group alarm
H3 Group fault
P3
♦
P1 e.g. output voltage
P2 e.g. output current
P3 e.g. speed
♦
A10 Operator panel OP2
Pushbutton B3 lamp test
Pushbutton B4 fault acknowledgement
♦
S10 Mushroom head pushbutton for safety shutdown
S11 Pushbutton, drive converter ON
S12 Pushbutton, drive converter OFF
S13 Key-actuated switch for changeover,
local/remote operation
with the
Siemens AG
SIMOVERT MV Commissioning Instructions
!
6SE8004-0BH76