1. Introduction
The EverFocus eZ.HD Series EMD935F is equipped with a 1/2.9" SONY 2.24M pixels CMOS sensor
and providing high resolution of 1080p. Featured with the Digital Wide Dynamic Range (D-WDR)
function, the camera can provide clear images even under back light circumstances where intensity
of illumination can vary excessively.
The EMD935F with its 3 Axis rotation design allows wall or ceiling mounting flexibility in an IP68
weather resistant. The EMD935F comes with 6 IR LEDs, supporting up to 10m (~33ft.) IR distance in
night vision, also can work in both indoor and outdoor environments. The EMD935F supports both
NTSC and PAL scanning systems, which can be switched.
1.1 Packing List
Camera Body x 1
User Manual x 1
DC Power Pigtail Cable x 1
Template Plate x 1
Set Screw x 2
1.2 Features
1080p full HD with high flexibility and performance for astounding image
1/2.9" SONY 2.24M pixels CMOS sensor, delivering amazing high sensitivity
Astounding image quality from the 2.8mm lens
Extended IR range of up to 10M/33ft. with 6 LEDs (depending on scene IR reflectivity)
Exview HAD CCD II delivers amazing high sensitivity of 0.05lux – very low light sensitivity
D-WDR to improve the visibility under high contrast scene
3D Noise Reduction ensures less blurry moving subjects, vivid and high SN ratio
images even under low light environments
Supports 1080p, 720p & 960H analog signal output.
eZ.Controller function : Control camera OSD settings and PTZ operation from DVR end
EMD935F Outdoor Mobile IR Mini Ball Camera
Screw x 3
Plastic Anchor x 3
Hexagon Wrench x 1
UTC Controller (for OSD setup) x 1
(order separately)
5