Upgrading And Provisioning; Upgrade And Provisioning Configuration; Configure Via Keypad Menu; Configure Via Web Gui - Grandstream Networks WP810 Administration Manual

UPGRADING AND PROVISIONING

The WP810 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.

Upgrade and Provisioning Configuration

There are two ways to setup upgrade and provisioning on WP810. They are Keypad Menu and Web GUI.

Configure via keypad Menu

1. In WP810 Settings, select Advanced Settings  System Upgrade.
2. Navigate to Firmware and configure the firmware upgrade server path.

Configure via Web GUI

Open a web browser on PC and enter the IP address for the WP810. Then login with the administrator
username and password. Go to Maintenance  Upgrade and Provisioning Firmware., enter the IP
address or the FQDN for the upgrade server and choose to upgrade via TFTP, HTTP or HTTPS (The default
setting is HTTPS). Save and apply the changes or reboot the phone for the upgrade process to begin.

Figure 12: WP810 Upgrade Configuration via Keypad Menu

WP810 Administration Guide
Version 1.0.1.1
P a g e | 56