4
C
2: H
HAPTER
ARDWARE
Top Panel
Left Side Panel
Installation
Requirements
I
NSTALLATION
The top panel of the gateway contains 6 LEDs.
1
2
3
4
M
C O
N
W A
IN T
P R
l
Ethernet Ports (1-4) The Ethernet port LEDs (green) will flicker when the corresponding port
WAN (globe icon)
Status (checkmark
icon)
Power connector (1) Plug the included power adapter into this connector. Use only the
Power switch (2)
The gateway can be positioned in any convenient place in your office or home.
Follow these guidelines to ensure a troublefree installation:
Place the gateway on a flat horizontal surface.
I
Keep the gateway away from any sources of heat.
I
Do not place the gateway in a dusty or wet environment.
I
Be sure to turn off the power, remove the power cord from the outlet, and keep
your hands dry when connecting other devices to the gateway.
is sending or receiving data.
The WAN port LED (green) will flicker when the WAN port is sending or
receiving data.
The Status LED will flash once per second to indicate that the gateway
is functioning correctly.
power adapter that came with the gateway.
Turns the power to the gateway on and off.