Windows Nt; Configuring On Unix-Based Platforms - 3Com 3C510 User Manual

Windows NT

Configuring on
UNIX-based Platforms
1 From the Start menu, select Settings, and then Printers.
2 Locate the icon that corresponds to the printer connected to the gateway.
Right-click the icon, and then select Properties.
3 Select Ports, and then select PRTmate: (All-in-1) from the Print To the following
port: list.
Be sure that the printer driver is the correct driver for your the printer.
4 Click Configure Port. Enter the IP address of the gateway and then click OK.
5 Make sure that all settings mentioned above are correct and then click OK.
Follow the traditional configuration procedure on UNIX platforms to setup the
print server of this product. The printer name is "lp."
Configuring on UNIX-based Platforms 21