Installation; Starting The Machine - Saeco 10002778 Operation And Maintenance Manual

STARTING THE MACHINE

Make sure the power button is not pressed and the machine is turned off. Check the machine
features on the label on the bottom of the appliance.
1
Remove the coffee bean hopper
lid.
Fill the hopper with coffee beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
Once fi lled, place the tank back
into the machine.
7
Press the main power button to the
"ON" position.
2
Close the lid pushing it down
completely.
5
Insert the plug into the socket
located on the back of the machine
and insert the other end into a
power outlet with suitable current.
The machine will automatically prime the water circuit.
The machine is now ready for use.
Water may not dispense into the container when the machine is
self-priming. This should be considered normal.

INSTALLATION

3
Remove the water tank.
Install the water fi lter as
recommended on page 7.
6
Place a container beneath the hot
water/steam wand.
5