Siemens Octiv S Information page 18

Your programs
Depending on how your
audiologist has programmed
your hearing aid(s) will
determine what program you
select. When the program
button is pressed once, you
will hear two beeps indicating
a move onto program two. If
the program button is pressed
again, you will hear three
beeps and so on.
18
Please note:
• To reset your hearing aid to the original program (1),
press the program button until only one beep is heard or
alternatively to reset all settings, turn the aid off and on
again.
• Do not use the loop setting (3) unless you are in the vicinity
of a loop system. If the loop setting is active at any other
time, the amplified sound will be reduced.
1.
Everyday Listening
2.
3.
4.
5.
6.