Toro Groundsmaster 360 Service Manual page 160

Disassembling the Transmission (continued)
Hydraulic System: Service and Repairs
13. Remove the 2 bolts that attach the accumulator cover to the transmission
pump body.
14. Remove the cover, gasket, collar, spring, and piston from the pump body. For
assembly purposes, note that the hole in the collar is toward the outside of
the pump body. Discard the gasket.
g033427
1. Hex plug (2 each)
15. Remove the 2 hex plugs from the pump body.
16. Remove and discard the O-rings from the plugs.
17. Remove the 4 socket-head plugs from the pump body.
g033428
1. Pump body
18. Remove the 3 shorter (45 mm) and 2 longer (95 mm) flange-head screws
that attach the pump body to the center case, and remove the pump body
from the center case.
Figure 82
2. Socket-head plug (4 each)
Figure 83
2. Center case
Page 4–102 Groundsmaster 360
16225SL Rev C