Remote Control (For Vr388/55) - Philips VR388/55 User Manual

D
ESCRIPTION OF

Remote Control (For VR388/55)

1
TV
VCR
2
– +
POWER
CBL/DBS
3
0EJECT
STILL/SLOW
MENU
4
PLAY
REW FF /OK
EXIT/STATUS
3
5
1 ¡
7
6
¶REC/OTR STOP
S.SEARCH
TIMER
7
1 2 3
8
+ +
CH
START STOP DATE
4 5 6
9
– –
DBS DAILY WEEKLY
7 8 9
10 VOL
0
SPEED CLEAR
QUICK PROGRAMMING
11
4INDEX ¢ AUDIO/MUTE
VCR/TV
12
Using this remote control to
operate PHILIPS TV
You can use this remote control to
operate some of the PHILIPS TVs.
1 TV button
Makes the remote control ready for
operating the TV.
2 CBL/DBS button
Does not function for this VCR.
3 STILL/SLOW button
Stops the tape during recording (pause)
or playback (still picture) temporarily.
( P.14, P.16)
Press again to resume normal recording.
Press PLAY 3 to resume normal
playback. Activates slow motion picture
when pressed for more than 2 seconds
during playback.
VR388/588-55 EN (N)
C
4 MENU button
Before using this button, press VCR.
• After pressing VCR, calls up the
main menu. ( P.11)
13
5 EXIT/STATUS button
14
Before using this button, press VCR.
15
• After pressing VCR:
16
– Displays the time counter, present
17
time, channel number, and
remaining tape length. ( P.16)
18
– Exits from menu operations when
19
using the menus. ( P.11)
20
6 1 (Rewind) / 2 button
21
Before using this button, press VCR.
• After pressing VCR:
– Rewinds the tape. Also, during
22
playback, starts rapid reverse
visual search. ( P.14)
23
– Goes back to the previous menu
24
screen when using the menus.
( P.11)
7 TIMER button
Display the Timer Recording menu.
( P.17)
8 REC (record)/OTR ¶ button
• Starts recording when pressed once.
( P.14)
• Starts a recording for 30 minutes to 9
hours long. When pressed more than
once, the shut-off time increases in
30-minute intervals. ( P.15)
9 Number buttons
(0, 1, 2, 3, 4, 5, 6, 7, 8 and
9)
Before using these buttons, press VCR.
• Press to select a channel on the VCR.
To select channels 1 to 9, press 0
then the channel you want. For
example, for channel 4, press 0 then
4.
• Also used to programme the Timer
Recordings. ( P.17)
10 SPEED button
Selects the tape speed for recording (SP,
LP, or SLP).
During playback, the tape speed is
automatically selected (SP, LP, or SLP).
( P.14, P.17)
SP, LP : For PAL signal.
SP, SLP : For NTSC signal.
— 6 —
6
ONTROLS
11 VCR/TV button
Does not function for this VCR.
12 INDEX 4 / ¢ buttons
Locates an index marked at the
beginning of every recording. ( P.15)
13 STILL/SLOW +/– button
• +: During a slow motion picture,
adjust the playback speed in the
forward direction. ( P.16)
• –: During a slow motion picture,
adjust the playback speed in the
reverse direction. ( P.16)
14 VCR button
Makes the remote control ready for
operating the VCR.
15 POWER button
Before using this button, press VCR or
TV to select your target component.
• After pressing VCR:
– Turns the VCR on or off.
– Sets the VCR for an unattended
For some Philips TV only:
• After pressing TV, turns the TV on or
off.
16 PLAY 3 / 5 button
Before using this button, press VCR.
• After pressing VCR:
– Starts normal playback. ( P.14)
– Moves up the cursor when using
17 EJECT 0 button
Ejects the cassette. ( P.14)
18 ¡ (Fast forward) / 3/OK
button
Before using this button, press VCR.
• After pressing VCR:
– Fast forwards the tape. Also during
– Selects the items on the menus or
19 S. (Skip) SEARCH button
Skips playback for 30 seconds by time
counter reading.
When pressed more than once up to 4
times, the search time increases in 30-
second intervals up to 2 minutes.
( P.16)
6/1/99, 9:01 AM
(C )
ONTINUED
recording (timer recording) after
timer settings are completed.
( P.18)
the menus. ( P.11)
playback, starts rapid forward
visual search. ( P.14)
goes to the next menu screen when
using the menus. ( P.11)