Table of Contents
Advertisement
2.
PLAYBACK
1
Insert the cassette into the cassette slot.
2
Press the playback button
3
Picture scanning: Press the
(forward) button once or several times. You have a
choice of several picture scanning speeds.
STOP h
4
Interrupt: Press the
5
Wind and rewind: Interrupt the playback function and
H
press the
(rewind) or
If you want to carry out this function on your video
recorder, then turn the outer rotary control
left or to the right.
If, during wind/rewind, you want to have a quick access
to picture scanning, use the 'Instant View' function.
6
INSTANT VIEW: If you hold the
(Wind) button during wind or rewind, you will switch to
picture scanning. If you release the buttons, the video
recorder will automatically switch back to rewind or wind
again.
7
Eject a cassette: Interrupt the playback function and
EJECT J
press the
button on the video recorder.
PLAY G
.
H
I
(reverse) or
button.
I
(wind) button.
o
to the
0:20
H
I
(Rewind) or
Notes: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* The picture quality will deteriorate during Picture
Scanning. The sound is turned off.
* With this video recorder you can play back cassettes
that have been recorded on other video recorders in the
NTSC standard. This only works for PAL-television sets
which are suitable for a picture frequency of 60 Hz.
During NTSC-playback some special features (e.g.: still
picture) are not possible.
Still picture/Slow motion
STILL R
1
Press the
button. A still picture appears on
the screen.
STILL R
2
Each time you press
move on one step.
STILL R
3
Hold the
button. The picture will be played in
super-slow motion.
I
4
Press the
button several times. You have a choice
of several playback speeds. When you press the
button several times you will return to the still picture.
There is no sound during slow motion playback.
Note: If the still picture vibrates vertically, hold the
P r
P q
or the
button at step
minimal. This setting will be stored automatically.
Please note, however, that interference may still occur
with poor quality cassettes.
again the picture will
H
1
until the vibration is
5
Advertisement
Table of Contents
