Table of Contents
Advertisement
1
Press the MENU button to bring up the main menu display.
2
Press the Number 3 button to select TUNER SET UP.
TO SELECT PUSH NO. SHOWN
1 TV
2 CABLE TV
ON
3 AUTO PROGRAMMING
4 ADD/DELETE CH
5 CH MEMORY REVIEW
6 TV STEREO
ON
7 2ND AUDIO
TO END PUSH EXIT
3
Press the Number 6 button to select TV STEREO or the
Number 7 button to select 2ND AUDIO. ON will appear to
the right of your selection.
4
Press the STATUS/EXIT button to exit.
5
To play a tape, press the PLAY button. Or, to record,
select the channel to be recorded using the CHANNEL
(Up/Down) buttons, then go to step 6.
6
Press the REC(ord)/OTR button to start recording.
MTS Broadcast Stereo System (cont'd) 43
2
3
2
3
1
5
6
4
8
9
7
0
+100
PLAY
REW
F.FWD
STOP
6
1
Helpful Hints
• You can only receive and record in
stereo or second audio programs
that are broadcast in second audio
or stereo. You can only play in
stereo or second audio tapes that
were recorded in stereo or second
audio. Please see page 42 to deter-
mine if the program you want to
watch/record is being broadcast in
stereo or second audio.
• If you select second audio when
second audio is not available, the
VCR will record normal audio.
5
4
Advertisement
Table of Contents
