26 Recording One Channel/Watching Another
1
Start a recording (see page 25).
2
Press the VCR/TV button to put the VCR in TV position. The
VCR light will disappear from the VCR's display panel.
3
Use the TV remote control to select the channel you
want to watch.
4
To return to the channel being recorded, use the TV
remote control to select channel 3 or 4 (whichever the
CH3/CH4 switch on the back of the VCR is set to).
5
Press the VCR/TV button to put the VCR in VCR position.
(The VCR light will appear on the display panel of the VCR.) The
channel being recorded will appear on-screen.
6
To stop the recording, press the STOP button.
3
Select the channel you
want to watch at the TV.
4
Set the TV to channel 3 or
4.
2
3
1
5
6
4
8
9
7
0
+100
PLAY
REW
F.FWD
STOP
1
Helpful Hints
• If you use a Cable Box or satellite
system hookup, you may not be
able to watch one channel while
recording another. See pages eight -
nine for details.
• If you don't receive channels, check
your hookups, then follow the
instructions above carefully.
2
5
6