Table of Contents
Advertisement
24 Playing
Read and follow the steps below to play a tape.
1
Turn the TV on and set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The power will come on. The VCR
will place itself in VCR position automatically (the VCR light and
the Cassette-Inside light on the display panel of the VCR will
appear). If the tape's record tab has been removed, playback will
start automatically.
3
If playback does not start automatically, press the PLAY
button to start playback.
4
Press the STOP button on the remote control or the
STOP/EJECT button on the VCR once to stop playback.
5
Press the REW(ind) button on the remote control or the
REW(ind) button on the VCR to rewind the tape.
6
When playback is stopped, press the EJECT button on the
remote control or the STOP/EJECT button on the VCR
again to remove the tape.
Turn on the TV.
1
2
Insert a tape in the VCR.
2
3
1
5
6
4
8
9
7
0
+100
5
PLAY
REW
F.FWD
STOP
Helpful Hints
• If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR light
is on, then press the PLAY button.
• Other playback options and fea-
tures are on pages 37-41.
6
3
4
Advertisement
Table of Contents
