Front - Sony Ericsson P1c Working Instructions

Working Instruction, Mechanical

4.1.5 Front

D '
ON T FORGET TO REMOVE THE PROTECTIVE TAPE FROM THE
LCD MODULE IF YOU HAVE A NEW LCD MODULE BEFORE
REASSEMBLING OF THE FRAME
Do not touch the LCD glass surface. Blow away dust with
an ionized air gun or blower.
Place the Front onto the frame, start at the keyboard side.
Press down the frame so that the frame and the Front snap
together.
Make sure that there is no gap between the two half's -
Visually inspect all around the unit.
3/000 21-1/FEA 209 544/126 A Approved according to FEA matrix doc number
©
Company Internal Sony Ericsson Mobile Communications AB