One-Touch Recording - Philips VR810BPH Owner's Manual

34 One-Touch Recording

The One-Touch Recording (OTR) function allows you to start an
immediate timed recording 30 minutes to six hours long of the
channel you are watching. Before you begin, make sure:
• Channels are set up. Details are on pages 12-13.
• The desired recording speed (SP or SLP) has been selected with
the ALT/SPEED button. Details are on pages 25, 41 and 77.
• There is a tape in the VCR. Make sure the tape's record tab is
intact (see page 5) and the tape is long enough to record the
program(s). If the end of the tape is reached during an OTR,
recording will stop. The VCR will eject the tape and turn itself
off.
• The VCR is in VCR position. (The VCR light will appear on the
display panel of the VCR when the VCR is in VCR position. If
the VCR light does not appear, press the VCR/TV button once.)
Starting an OTR
1
Press the VCR button.
2
Use the CH(annel) 8/9 button or the Number buttons to
select the channel you want to record.
3
Press the REC(ord)/OTR button repeatedly until the
desired recording length appears briefly on the screen and
on the display panel. The \ light will flash on the display panel.
(The recording length will not appear on the screen if ON
SCREEN MODE is set to OFF.)
OTR (0:30)
CH. 12
SLP
4
To stop an OTR before recording is finished, press the
STOP 9 button.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button repeatedly until REC appears in the upper
left corner of the TV screen. (ON SCREEN MODE cannot be set
to OFF. Details are on page 28.) The \ light will remain on the dis-
play panel.
SAT/
CBL/DBS TV
VCR/TV POWER SMARTPICTURE
QUICK PROGRAMMING
+ +
1 2 3
— + *
ABC
START STOP DATE
- -
4 5 6
GHI JKL
VPS/PDC DAILY WEEKLY
7 8 9
PQRS TUV WXYZ
SPEED DBS/SAT
0
ALT CLEAR
STILL/SLOW
-
.......... ..........
REW
PLAY
4 STOP
VOL
OK/STATUS
MENU
TIMER
TURBO AUDIO/ SKIP
TIMER MUTE SEARCH
JOG/SHTL
REV
Helpful Hints
• To check the time remaining for an
OTR after the OTR is in progress,
press the OK/STATUS button. The
remaining time will appear beside
OTR on the screen. (ON SCREEN
MODE can not be set to OFF.)
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on the VCR
display panel. The desired length
also will appear on the screen if ON
SCREEN MODE is set to ON or
COUNTER.
• If the preset time for a timer record-
ing comes up during an OTR, the
OTR has priority.
VCR
1
DEF
MNO
+
FF
CH
2
TAPE
MANAGER
3
REC REC /OTR
FWD