Rear Panel 23 - Philips VR810BPH Owner's Manual

ANTENNA IN Jack
Connect your antenna or cable here. Details are on pages 6-9.
CABLE BOX Jack
Connect the Controller here. You may use the Controller with
either a Cable Box or DBS receiver. Details are on pages 50-54.
VIDEO IN Jack
Connect a video cable coming from the VIDEO OUT jack of a cam-
corder, a Cable Box/DBS, or another VCR here. Details are on pages
35 and 48.
VIDEO OUT Jack
Connect a video cable going to
the VIDEO IN jack of a
camcorder or another VCR here.
Details are on pages 48 and 56.
AUDIO OUT Jacks
Connect audio cables going to the
AUDIO IN jacks of a camcorder,
another VCR, or an audio system
here. Details are on pages 48 and 56.
AUDIO IN Jacks
Connect audio cables coming from the
AUDIO OUT jacks of a camcorder, another
VCR, a Cable Box/DBS, or an audio source here.
Details are on pages 35 and 48-49.
S-VIDEO OUT Jack (VR1010BP only)
Connect an S-Video cable going to the S-VIDEO
In jack of a TV here. You may use S-Video connections
instead of the standard RCA-style video (yellow)
connections. S-Video connections provide a better picture.
S-VIDEO IN Jack (VR1010BP only)
Connect an S-Video cable coming from the S-VIDEO OUT jack
of another VCR, DVD Player, or video source here.
AC Power Cord
Connect to a wall outlet (120V) to supply power to the VCR.
OUT
VIDEO
(MONO)
L
S VIDEO
AUDIO
R
OUT IN
IN
ANTENNA
CABLE BOX
CH3

Rear Panel 23

LP 20917-003
VHF/UHF
IN
CH4
TV
OUT
TV OUT Jack
Use the supplied RF
coaxial cable to con-
nect this jack to the
ANTENNA IN Jack
on your TV or to the
IN Jack on your Cable
Box/DBS (if applica-
ble). Details are on
pages 6-9.
CH3/CH4 Switch
Set to channel 3 or 4
to use your TV with
your VCR. Set your
TV to the same chan-
nel. Details are on
pages 6-9.