Table of Contents
Advertisement
10 Hookups with a Stereo TV
VIDEO (yellow) and
AUDIO (red and white) OUT Jacks
Audio and Video cables are not supplied.
1
Connect the antenna or cable to the ANT(enna) IN Jack
on the back of the VCR.
2
Connect a video cable to the yellow VIDEO OUT Jack on
the back of the VCR. Then, connect the other end of the
video cable to the VIDEO IN Jack on your TV.
3
Connect a stereo audio cable to the red and white
AUDIO OUT Jacks on the back of the VCR. Then, con-
nect the other end of the audio cable to the AUDIO IN
Jacks on your TV.
4
Turn on your TV, making sure it is in Line Input mode. This
might be referred to as the TV's Audio/Video In channel or the
Auxiliary In channel. Please refer to your TV owner's manual for
details.
1
antenna or cable to
ANT(enna) IN Jack
AUDIO
ANT
IN
L
OUT
IN
R
VIDEO
OUT
CH3 CH4
OUT
IN
2
Video Cable
Audio and Video IN
Jacks on TV
3
Stereo Audio Cable
Advertisement
Table of Contents
