1. Manuals
  2. Brands
  3. Philips Manuals
  4. VCR
  5. VR624CAT
  6. Hook-up instructions

Philips VR624CAT Hook-Up Instructions

Hookup pages
Hide thumbs Also See for VR624CAT:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual
VR624CAT
Video Cassette Recorder
Hookup Pages

Advertisement

Table of Contents
loading

Related Manuals for Philips VR624CAT

Summary of Contents for Philips VR624CAT

  • Page 1 VR624CAT Video Cassette Recorder Hookup Pages...

  • Page 2: Hookups Without A Cable Box/Direct Broadcast System

    Cable Box or a Direct Broadcast System, please see pages eight-nine. If you have a Stereo TV, please see page 10. After you hook up the VCR, go to page 11 to turn on the VCR. Disconnect the antenna or cable from your TV.
  • Page 3 Connect the supplied black RF coaxial cable to the OUT Jack on the back of the VCR and to the ANTENNA IN Jack on the TV. (You may use either a snap-on type (supplied) or screw-on type of coaxial cable, whichever you prefer.)

  • Page 4: Hookups With A Cable Box/Direct Broadcast System

    You may not program channels at the VCR. You can only program a timer recording for one channel at a time. Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04). Set the CH3/CH4 switch on the back of the VCR to the same channel.

  • Page 5: Recording One Channel/Watching Another

    Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04). Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) o/p buttons to select the channel you want to record at the VCR.

  • Page 6: Hookups With A Stereo Tv

    VCR. Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. Connect a stereo audio cable to the red and white AUDIO OUT Jacks on the back of the VCR.

  • Page 7: Front Panel

    During tape playback, press to fast forward the tape while the picture stays on the screen. Details are on page 41. Press to select an item in the VCR menu or to change the setting of a menu item.

  • Page 8: Rear Panel

    Connect audio cables coming from the AUDIO OUT Jacks of a camcorder, anoth- er VCR, or an audio source here. Details are on page 33. If you connect other equip- ment to the AUDIO and VIDEO IN jacks on the back of the VCR, select channel 001 (AV REAR) at the VCR.

  • Page 9: Helpful Hints

    Audio and Video cables are not supplied. Make the connections shown above. VCR 1 will play your tape. Put a prerecorded tape in VCR 1. VCR 2 will record your tape. Insert a blank tape in VCR 2. The VCR must be in VCR position. (The VCR light will appear on the display panel.

Table of Contents