Table of Contents
Advertisement
30 Recording
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever
channel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape with its record tab intact in the VCR.
3
Press the VCR button.
4
If the VCR light appears on the display panel, go to step 5. If the
VCR light does not appear, press the VCR/TV button
once.
5
Press the SPEED button until the desired tape speed
appears briefly on the screen. (Details about tape speed are on
page 36.)
6
Use the CH(annel) o/p buttons or the Number buttons
to select the channel to be recorded.
7
Press the REC(ord)/OTR button once to start recording.
The REC(ord) light will appear on the VCR display panel.
8
To pause the recording, press the PAUSE/STILL button
once. The REC(ord) light will flash. To resume recording,
press the REC(ord)/OTR button or press the
PAUSE/STILL button again. The REC(ord) light will come on
again.
9
To stop recording, press the STOP/p button.
1
Turn on the TV.
2
Insert a tape in the VCR.
EJECT
POWER
STATUS
TIME
MENU
CLEAR
/EXIT
SEARCH
6
1
2
3
4
5
6
7
8
9
MEMORY
ALT.CH
0
REC
PAUSE
/OTR
/STILL
PLAY
REW
F.FWD
STOP
CH.
VOL.
MUTE
3
CBL
VCR
TV
/DBS
ENTER
VCR/TV
SPEED
SLOW
4
Helpful Hints
• If you press the REC(ord)/OTR button
when a tape is not in the VCR, NO
CASSETTE will flash on the screen.
• If you press the REC(ord)/OTR button
while a tape without a record tab is
in the VCR, the VCR will eject the
tape and PROTECTED CASSETTE
CANNOT RECORD will flash on the
screen.
• Other recording options are on pages
31-37.
• You can change the tape speed
during a recording, but some
distortion will appear on the tape.
• The VCR will record in a preset
volume.
8
7
9
5
Advertisement
Table of Contents
