Valve Selection - Siemens SINUMERIK 840D Description Of Functions

02.99
3.4

Valve selection

3.4.1 General
"Valve selection..."
softkey
 Siemens AG 2000. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital Descr. of Functions HLA Module (FBHLA) – 04.00 Edition
You can select the servo solenoid valve from a list during initial start-up of the
SIMODRIVE 611 system. Once you have made your selection, the defaults of
the valve machine data are overwritten.
If the valve you want to use is not included in the list, you must enter the valve
machine data manually.
This softkey starts the user-prompted start-up process for the HLA module.
You can select a valve from a list stored in the module software, or a non-listed
valve, in the following menu display.
Fig. 3-6 "Valve selection for HLA" menu display
Enter "Unlisted valve" to call a new menu display (see Fig. 3-7) in which the
corresponding machine data can be entered manually.
Choose softkeys "Search..." and "Continue search" to look for any character
string within the list.
Select softkey "Back" to return to the previously displayed menu. This
softkey is disabled in menu display 3-6.
Note
When you select "Abort", the program branches back to the drive machine data
display (see Fig. 3-5), both in this screen and the following menu displays for
user-prompted start-up. The "Abort" softkey also activates a prompt box in
which you must confirm that you really want to abort start-up for this drive.
No data are ever changed when you select "Abort". This also applies to the
following menu displays.
3 Start-Up
3.4 Valve selection
3-55