Trigger Ratio Check; Trims Initial Set-Up - FUTABA 7PXR Instruction Manual

Throttle Ratio Check
-The throttle brake operation might be close by setting it to "
Throttle mode

Trims Initial Set-Up

- Steering trim (DT1) check
lever and make sure the marker moves on the ST graph. If the default has been changed, test
position.
- Throttle trim (DT2) check
and make sure the marker moves on the TH graph. If the default has been changed, test the
position.
Throttle trim (DT2)
44
Forward 50: Brake 50
Forward 70: Brake 30
Forward 100: Brake 0
Forward 50: Brake 50
Steering trim (DT1)
"
Forward 70: Brake 30
Forward 100: Brake 0
-
Steering trim
Throttle trim