Blaupunkt Bahamas MP34 Operating And Installation Instructions page 20

5 options are available:
Track number and play time
G
Track number and clock
G
CD number and track number
G
CD number and clock
G
CD number and play time
G
➮
Press the
several times for longer than two
seconds until the required display
appears.
➮
If you wish to repeat the current track,
briefly press button 4 RPT 9.
"RPT TRCK" appears briefly and RPT
lights up in the display.
➮
If you wish to repeat the current
CD, press button 4 RPT 9 longer
than two seconds.
"RPT DISC" appears briefly and RPT
lights up in the display.
➮
If you want to stop the repeat
function for the current track or CD,
press button 4 RPT 9 briefly and
"RPT OFF" appears briefly in the
display and RPT disappears.
➮
To play all the tracks on the current
CD in random order, briefly press
button 5 MIX 9.
"MIX CD" appears briefly and MIX lights
up in the display.
➮
To play the tracks on all the
inserted CDs in random order,
20
button 6 once or
press button 5 MIX 9 longer than
two seconds.
"MIX ALL" appears briefly and MIX lights
up in the display.
➮
Press button 5 MIX 9 briefly and
"MIX OFF" appears briefly in the
display and MIX disappears.
➮
To briefly play all the tracks on all
inserted CDs in ascending order,
press the MENU button 8 for
longer than two seconds.
"TRK SCAN" appears briefly follows by
blinking the track number of the CD
track being scanned.
➮
To stop scanning, briefly press the
MENU button 8.
The current track will then continue to
be played.
Note:
You can set the scantime. For
G
further details, please read the
section entitled "Setting the
scantime" in the "Radio mode"
chapter.
➮
Press button 3 E
"PAUSE" appears in the display.
➮
Press button 3 E
pause mode.
Playback is continued.
E 9. E E
E
E 9 while in E E
E