Step 1 - Measure And Cut All The Tap Holes Before Fitting The Taps Section 1 - Tap Installation Instructions - Zenith HydroTap G4 Celsius Series Installation Instructions Manual
Filtered, boiling, chilled and chilled sparkling drinking water with unfiltered hot and cold ambient water, for commercial kitchens
Table of Contents
Advertisement
Special Tools Required:
In addition to normal tools, the following will be required:
• 35mm diameter sheet metal hole punch for sink tops. (Not supplied)
• 35mm diameter hole saw for timber bench tops. (Not supplied)
• 42mm AF tube spanner or wrench (Not supplied) for fixing tap assembly.
NOTE: Taps are available with ARC or CUBE neck options.
Hole positioning:
Position the tap such that it dispenses
into the sink bowl.
Double Bowl
35mm hole
Page 10 of 32
Section 1
Tap Installation
802700NZ - Commercial Installation Instructions - Aug 2015 - V2.01
Advertisement
Table of Contents
